The editor will explain to you what is the JQ type clamp coupling

时间:2016-06-15 15:53 作者:admin 点击:
JQ type clamp couplingIt uses two clamp shells split along the axial direction. The coupling spacer has multiple blade branches. Like a slider coupling, due to its elasticity, it has the function of buffering and damping. Therefore, in the case of strong vibration Used more.The performance limit temperature of the elastomer determines the use temperature of the coupling, with good versatility and wide application range.
One of the most prominent advantages of this coupling is that it only needs to be suitable for axis alignment and difficult to install, thereby ensuring its zero-clearance performance.The shaft does not need to move axially during assembly and disassembly of the clamp housing coupling, so the assembly and disassembly are very convenient.
There is no elastic body in the middle of the JQ type clamp shell coupling. It is usually a lifting ring. The shaft at both ends is suspended. The diameter of the shaft hole is the diameter. It is generally used for vertical installation. The middle part is slotted with a suspension ring to block the equipment at both ends. Shaft head to transmit torque.
The JQ type jacketed coupling is used for the reactor agitating shaft that is too long. When the two stirring shafts are manufactured in two stages, the jacketed coupling should be selected for the connection of the two agitating shafts. It should be mentioned when ordering so that the size of the output shaft can be non-standard.
You may be right | Drum gear coupling | Elastic pin gear coupling | Interested in other products