WGI type-drum gear coupling (JB/ZQ4186-97)
The so-called WGI-type drum gear coupling means that the external teeth are made into a spherical surface. The center of the spherical surface is on the gear axis. The tooth side clearance is larger than that of ordinary gears. The drum gear coupling can allow larger angular displacement (relative to Straight gear coupling), which can improve the contact conditions of the teeth, increase the torque transmission capacity, and extend the service life.In the contact state along the tooth width when there is angular displacement, the gear coupling is composed of an internal gear ring with the same number of teeth and a flange half coupling with external teeth.The external teeth are divided into two types: straight teeth and drum teeth. When the gear coupling is in operation, the two shafts produce relative angular displacement. The tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and Power consumption, therefore, gear couplings need to work in a good and sealed state.Gear couplings have small radial dimensions and large load-bearing capacity. They are often used in shafting transmissions under low-speed and heavy-duty conditions. High-precision and dynamically balanced gear couplings can be used for high-speed transmissions, such as gas turbine shafting. transmission.Since the angular compensation of WGI type drum gear coupling is greater than that of straight gear coupling, drum gear couplings are widely used at home and abroad. Straight gear couplings are obsolete products. Those who choose to choose should try their best Not used.
Basic parameters and main dimensions of WGI drum gear coupling: