Tag tabHome > TAG tag > Z19A type expansion joint sleeve

Z19A type expansion joint sleeve

  • Z2 type expansion sleeve
  •   The Z2 type expansion sleeve is composed of an open double-cone inner ring, an open double-cone outer ring and two double-cone compression rings. It is tightened with an inner hexagonal bolt, and the elastic ring does not move axially relative to the hub when tightening. , Compared with the Z1 type, the same pressing force can produce greater radial pressure...

  • Z3 type expansion sleeve
  •   The inner and outer cone rings of the Z3 type expansion sleeve are tightened with hexagon socket bolts, which can transmit large loads, and there is a disassembly threaded hole on one cone ring; the joint surface is longer, the neutrality is good, and it is suitable for high rotation accuracy requirements and large transmission Load occasions....

Total 1page2Records