Flange coupling is the most widely used rigid coupling, consisting of two half couplings and connecting bolts.There are two centering methods for flange couplings: one is to match the tenon on one half of the coupling with the groove on the other half of the coupling. ...
The positioning screw fixed plum coupling is also called a claw coupling, which is composed of two metal claw discs and an elastic body.The two metal claws are made of No. 45 steel, but aluminum alloy or stainless steel is also used when load sensitivity is required. ...
SWC型万向联轴器主要适用于轧钢机械、起重运输机械及其他重型机械,联接两个不同轴的传动轴系。其回转直径为100~620mm,传递额定转矩1.25~1000kN•m,轴线折角为15°~25°。...
The main body of Ever-Power cross slider coupling is made of 45# steel, the material is well-proportioned, and the uneven rotation caused by the uneven material is avoided. The surface is blackened and rust-proofed. Formulated with good temperature resistance, strong toughness, abrasion resistance...
The Oldham coupling is composed of two shaft sleeves and a central slider.The center slider is usually made of engineering plastic as a torque transmission element, and other materials, such as metal materials, can be selected under special circumstances.The center slider is 90°relatively distributed through both sides...
The smelting of casting alloys is an indispensable process in the production process of castings, also called smelting process, which is a fundamental factor that determines the quality and cost of castings.Many performance indicators of castings are largely determined by the chemical composition, temperature and purity of the molten metal...
Cast steel can be divided into carbon steel and alloy steel according to the chemical composition. In the alloy steel, it is divided into low alloy steel, medium alloy steel and high alloy steel according to the number of alloy elements. ...
The coupling is used in a variety of different host products, and the surrounding working environment is more complicated, such as temperature, humidity, water, steam, dust, sand, oil, acid, alkali, corrosive media, salt water, radiation and other conditions. One of the important factors that must be considered when shafting...
The coupling is heated and expanded by heating or the end of the shaft is cold and contracted by cooling, so that the wheel coupling can be easily installed on the shaft. This method is better than the static pressure method and the dynamic pressure method There are many advantages. For wheels made of brittle materials, the temperature difference is used...
The three-jaw coupling for pumps is a pin made of several non-metallic materials, placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are transmitted through the pin. Connector....