Elastic pin gear coupling

  • Possible accidents of the coupling
  •   The axis of the coupling is skewed, and the coupling will not hit: In order to prevent such accidents, in addition to the alignment of the axis, the position of the coupling hole and the shaft, and the position of the striker, it is also necessary to pay attention to the collision. The position of the point should be selected, the first and second clicks should be light, after a certain interval (about 1/3) of the people enter, then...

  • Factors to consider when choosing a coupling
  •   The type of power machine is the basic factor for selecting the type of coupling; the power of the power machine is one of the main basis for determining the size of the coupling, and it is proportional to the torque of the coupling...

  • The cold assembly method of the installation process of the coupling
  •   There are three cold mounting methods for coupling installation methods: press-in assembly method, direct assembly method and hydraulic assembly method. This is an ideal assembly method, but it must be designed and manufactured in advance to respond to the other components before it can be used. ...

  • LZ (formerly ZL) type elastic pin gear coupling
  •   The base moment of the ZL-type elastic pin gear coupling realizes the connection of the two halves of the coupling. The coupling transmits a large torque. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is small and the mass is smaller. It is light and can partially replace the gear coupling...

  • LZZ (formerly ZLL) type elastic pin gear coupling with brake wheel
  •   ZLL type-elastic pin gear coupling with brake wheel has a certain performance of compensating the relative deviation of the two shafts. It is suitable for medium and large power transmissions. It is not suitable for certain requirements for vibration reduction and strict control of noise. Working part....

Total 3page26Article
  • Home
  • Previous
  • 1
  • 2
  • 3
  • last page