The radial movement of the star coupling due to centrifugal force during high-speed operation will accelerate its wear. The polyurethane elastomer is limited by the convex claw block, which can avoid internal deformation due to impact and external deformation due to centrifugal force. ...
The structural characteristics of the diaphragm coupling: 1. It is widely used in metallurgy, steel rolling, mining, chemical industry, shipbuilding, pumps, fans and other industries. 2. The working temperature is -20~+250oC, and no lubrication is required, and it can work in corrosive media. 3. Convenient for assembly and disassembly, inspection, disassembly...
The JQ type clamp shell coupling uses two clamp shells split along the axial direction. The coupling spacer has multiple blade branches. Like a slider coupling, it has the function of buffering and damping due to elasticity. Therefore, it is often used in situations with strong vibration. ...
Coupling is a mechanical part that is used to connect two shafts (active shaft and driven shaft) in different machines to rotate together to transmit torque. It has a certain ability to compensate for the offset of the two shafts, in order to reduce the mechanical transmission system Vibration, reduce shock peak load,...
In metallurgical machinery and heavy machinery low-speed and heavy-load shafting transmission, shock, vibration and two-axis deviation are the unfavorable factors of proportional convexity. Only the drum gear coupling with good vibration reduction and cushioning effect can improve the operation of the transmission system. Status, and the gear coupling doesn't care...
The coupling is used to connect the two shafts together. The two shafts cannot be separated when the machine is running. The two shafts can be separated only after the machine is stopped and the connection is disconnected. ...
1. It can be assembled and disassembled without interfering with the master-slave device. The replacement of the coupling can be completed within 2 hours, which improves equipment utilization. 2. It can operate under harsh environmental conditions, can operate within 300 degrees Celsius, can operate in corrosive environments such as acid, alkali, salt spray...
Drum-shaped gear coupling is a key equipment for energy saving.Sometimes there are some failures, as follows: 1. Insufficient lubrication or dry grinding; 2. The oil is not clean; 3. The center deviation of the drum gear coupling is too large, and the relative displacement of the tooth surface is large;...
In the coupling, under the condition of angular displacement, the edge of the straight tooth is squeezed, and the stress is concentrated. The drum-shaped tooth surface improves the contact conditions of the inner and outer teeth, thereby reducing the friction and wear of the tooth surface and reducing the noise.Under the same conditions, the outer diameter of the inner gear sleeve and the coupling...
The so-called shaft transmission is the transmission of the coupling, including jaws, gears, elastic, universal couplings, plum blossom couplings, etc. Its transmission efficiency is higher than any other transmission form, mainly because there is no relative sliding displacement, which means Does not generate heat. ...