Plum-shaped elastic coupling

  • Product overview of flange couplings
  •   Definition: Flange coupling (also known as flange coupling) is the use of bolts to connect two flange (flange) disc-type half couplings, and the two half couplings are respectively connected to the two shafts with keys to achieve Two shafts are connected, a rigid coupling that transmits torque and motion. ...

  • Coupling size marking
  •   Uniformly stipulating the marking method of couplings is to facilitate the management and technical exchanges of the design, selection, manufacturing and use departments, to simplify the expression of technical content, so that the coupling manufacturer and the user have a common simplification and integration. Standardized technical language...

  • Elastic block coupling
  •   The elastic block coupling is an elastic coupling with rubber as the elastic element material, no torsional transmission gap, and easy to adjust the stiffness on site. It has compensation for the relative offset of the two shafts, damping and buffering performance, energy saving, no noise, and no lubrication. ..

  • Implementation of "zero tolerance" for environmental pollution in 2015
  •   Environmental pollution refers to the behavior of natural or man-made addition of a certain substance to the environment that exceeds the self-purification capacity of the environment to cause harm.Specifically include: water pollution, air pollution, noise pollution, radioactive pollution, etc. ...

  • Maintenance of diaphragm coupling
  •   、Before installation, clean the end faces of the two shafts and check the fit of the key notches on the end faces; 2. After the diaphragm coupling is installed, it is necessary to check all screws for normal operation. If found to be loose, they must be tightened. Repeat this for several shifts. To ensure that it will not loosen...

  • Four characteristics of slider coupling
  •   (1) Backlash-free connection, simple transmission structure for small torque measurement; (2) Convenient use, easy installation, time saving, wide size range, small moment of inertia, and easy visual inspection; ...

  • Structure and performance of tire coupling
  •   The structure of the tire coupling, the middle is a rubber tire ring, which is connected with the half coupling with a backing plate. Its structure is simple and reliable, and easy to deform. Therefore, it allows a relatively large relative displacement and an angular displacement. Up to 5°~12°, axial displacement up to 0.02D, radial position...

  • Introduction of elastic pin coupling
  •   The elastic pin coupling uses a number of non-metallic pins to be placed in the holes of the flanges of the two half couplings to realize the connection of the two shafts. The pin is usually made of nylon, and nylon has a certain The elasticity, the structure of the elastic pin coupling is simple, replace...

  • Overrunning clutch
  •   Overrunning clutch is a kind of clutch that can be automatically disengaged or engaged by the relative speed change of the main and driven parts, or the change of the rotation direction. It is mainly used for speed change, prevention of reverse rotation, and intermittent movement.According to the working principle, there are two...

Total 12page114Article
  • Home
  • Previous
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • Next page
  • last page