Plum-shaped elastic coupling

  • Overview of rigid couplings

    • 　　Rigid coupling, as the name implies, is actually a torsionally rigid coupling. Even when it is under load, there is no backlash. Even when the load is caused by deviation, the rigid coupling still transmits torque rigidly. ...

  • Reasons for the distortion of the diaphragm of the diaphragm coupling

    • 　　Diaphragm couplings are two half-shaft joints respectively installed on the two shafts, with an extended section in the middle. A set of diaphragms are connected together in the correct way with precision bolts, and there must be a certain gap between the two diaphragms. . ...

  • What role does the material of the nylon pin play in the coupling?

    • 　　In fact, elastic pin couplings are generally elastic sleeve pin couplings, nylon rod pin couplings, the former pin is an elastic element like rubber or polyurethane.The latter is an elastic element with a nylon rod. The two half-sections are matched with holes as large as the drill, and the nylon rod is inserted into it,...

  • Product introduction of JQ type clamp coupling

    • 　　The structure of the JQ type jacket coupling: there is no elastic body in the middle, and it is generally hoisted. There is a hoisting ring in the middle to hang the shafts at both ends. The diameter of the shaft hole is the diameter.It is generally used for vertical installation, and the middle part is slotted with the shaft heads of the suspension ring to hold the two ends of the device to transmit the torque. ...

  • What are the problems with the tooth surface of the drum gear coupling in use?

    • 　　Drum gear coupling is a new type of gear coupling developed on the basis of spur gear coupling, digesting and absorbing foreign advanced technology.It is composed of an outer gear sleeve with a drum-shaped tooth thickness and a matching inner gear ring that connects the two shafts. It is suitable for heavy...

  • Explanation of common terms of coupling

    • 　　Parallel deviation; when the two shafts are connected, the deviation between the two shafts in the radial direction.Angle deviation: When the two shafts are connected, the deviation angle of the two shafts.Axial deviation: when the two shafts are connected, the displacement of the two shafts in the axial direction. ...

  • The structure and classification of serpentine spring coupling

    • 　　The main structure of the serpentine spring coupling is composed of two half couplings, two half outer covers, two sealing rings and a serpentine spring sheet.It transfers torque by embedding the serpentine spring into the tooth slots of the two halves of the coupling. For example, the coupling uses serpentine springs to embed the two half of the coupling...

  • How to fix the elastic coupling

    • 　　1. Elastic coupling clamping screw fixation: Utilize the tightening force of the hexagon socket bolt to shrink the slit and clamp the shaft tightly.This method is convenient to fix and disassemble, and will not cause damage to the shaft, so it is a very common fixing method. ...

  • Five advantages of drum gear couplings over straight gear couplings

    • 　　The characteristics of the drum gear coupling (compared with the straight gear coupling) are as follows: 1. The angular displacement compensation is large. When the radial displacement is equal to zero, the straight gear coupling is The allowable angular displacement is 1º; the allowable angular position of the drum gear coupling...

  • How many parts does the SL slider coupling consist of?

    • 　　The SL slider coupling is composed of two shaft sleeves and a center slider. The center slider as a torque transmission element is usually made of engineering plastics. In special cases, other materials, such as metal materials, can be selected. ...

Total 12page114Article
  • Home
  • Previous
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • Next page
  • last page