Plum-shaped elastic coupling

  • Assembly of Oldham Coupling

    • 　　Oldham coupling is a common structural form of movable rigid coupling.It is composed of two grooved couplings and an intermediate disc.There is a rectangular bump on each side of the middle disk, and the center lines of the bumps on both sides are perpendicular to each other and pass through the center of the disk,...

  • The structure and advantages of Ever-Power brand diaphragm coupling

    • 　　The diaphragm coupling is an all-metal flexible coupling.It realizes the flexible transmission of the coupling through the elastic deformation of the thin high-strength alloy steel sheet, so that the coupling can not only absorb the misalignment and shock absorption of the drive shafts on both sides, but also...

  • There are three reasons for the damage of the sprocket coupling

    • 　　The sprocket coupling has the advantages of simple structure, convenient assembly and disassembly, no need to move the connected two shafts during disassembly, compact size, light weight, certain compensation ability, low installation accuracy, reliable work, long life, and low cost. . ...

  • Installation and maintenance of clutch

    • 　　To ensure that the clutch is always in a good working condition and has a satisfactory service life during the working process, in addition to the correct selection of the capacity and structure of the clutch, the correct installation, use and maintenance of the clutch are also required. ...

  • Talk about the advantages of the elastic sleeve pin coupling

    • 　　The elastic sleeve pin coupling has a relatively simple structure, easy to manufacture, does not require lubrication, does not need to be bonded with metal vulcanization, it is convenient to replace the elastic sleeve, does not need to move the half coupling, and has a certain degree of compensation for the relative offset of the two shafts and damping and buffering performance. . ...

  • How to troubleshoot the problem of cross shaft universal coupling

    • 　　If you want to know where the problem of the coupling occurs, you must first do the following: (1) First, check whether the connecting bolts of the universal coupling flange are loose, and tighten them as appropriate. (2) If the fault is still eliminated, remove the drive shaft assembly, and then...

  • What is the relationship between coupling and clutch?

    • 　　Couplings and clutches are used for the connection between the shaft and the shaft to transmit motion and torque.The main difference between the coupling and the clutch is that the two shafts connected by the coupling can only be separated by white disassembly after the machine stops; while the two shafts connected by the clutch...

  • Ever-Power creates an economical and applicable Oldham coupling

    • 　　The main body of Ever-Power cross slider coupling is made of 45# steel, the material is well-proportioned, and the uneven rotation caused by the uneven material is avoided. The surface is blackened and rust-proofed. Formulated with good temperature resistance, strong toughness, abrasion resistance...

  • The problem of coupling selection

    • 　　When customers don’t know how to choose a model, they often ask: With so many sizes, each model has so many shaft hole diameters and so many shaft hole lengths, how should I choose?The diameter of each shaft hole is selected according to the national standard data, and...

  • Correct selection of gear coupling

    • 　　Either end of the GL, GICL, GIICL, and GIICLD couplings can be used as the master and slave. CLZ type, GICLZ type, GIICLZ type couplings have the outer gear sleeve end connected with the intermediate shaft, and the half coupling end connected with the working axis or the motor shaft. ...

Total 12page114Article
  • Home
  • Previous
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • Next page
  • last page