Z1 type expansion sleeve

时间：2013-08-01 18:07　作者：admin　点击： 次
Detailed parameters of Z1 type expansion sleeve
 
The Z1 type expansion sleeve is composed of inner and outer cone rings.The structure is compact and light, suitable for occasions with small installation space.It can be used instead of various key connections or interference fit connections.In order to transfer larger loads, multiple pairs of expansion sleeves can be used. The single-sided compression does not exceed 4 pairs of rings, and the double-sided compression can reach 8 pairs of rings, and the neutrality is good.
 The basic size of Z1 type expansion coupling sleeve (produced according to JB/T 7934-1999)
basic size Rated load when Pf=100N/mm2 Weight

kg
d D L 1 Axial force F1
KN		 Torque M1
KN·m
mm
20 25 6.3 5.3 4.0 0.004 0.01
22 26 4.5 0.005 0.01
25 30 5.0 0.06 0.01
28 32 5.6 0.08 0.01
30 35 6.0 0.09 0.01
32 36 6.4 0.10 0.01
35 40 7.0 6.0 8.2 0.15 0.02
40 45 8.0 6.6 9.9 0.20 0.02
45 52 10.0 8.6 14.6 0.33 0.04
50 57 16.2 0.40 0.05
55 62 17.8 0.49 0.05
60 68 12.0 10.4 23.5 0.70 0.07
65 73 25.6 0.83 0.08
70 79 14.0 12.2 32.0 1.12 0.11
75 84 34.4 1.29 0.12
80 91 17.0 15.0 45.0 1.81 0.19
85 96 48.0 2.04 0.20
90 101 51.0 2.29 0.22
95 106 54.0 2.55 0.23
100 114 21.0 18.7 70.0 3.50 0.38
105 119 73.2 3.82 0.40
110 124 77.0 4.25 0.41
120 134 84.0 5.05 0.45
125 139 92.0 5.75 0.62
130 148 28.0 25.3 124.0 8.05 0.85
140 158 134.0 9.35 0.91
150 168 143.0 10.70 0.97
160 178 152.5 12.20 1.02
170 191 33.0 30.0 192.0 16.30 1.50
180 201 204.0 18.30 1.58
190 211 214.0 20.40 1.68
200 224 38.0 34.8 262.0 26.20 2.32
210 234 275 28.90 2.45
220 244 288.0 37.70 2.49
240 267 42.0 39.5 358.0 43.00 3.52
250 280 48.0 44.0 415 52.00 4.68
260 290 435.0 56.50 4.82
280 313 53.0 49.0 520.0 72.50 6.27
300 333 555.0 83.00 6.47
320 360 65.0 59.0 710.0 114.00 10.90
340 380 755 128.50 11.50
360 400 800 144.00 12.20
380 420 845 160.50 12.80
400 440 890 178.00 13.50
420 460 935 196.00 14.10
450 490 998.0 224.50 15.20
480 520 1070.0 256.00 16.00
500 540 1110.0 278.00 16.50
Note: Pf is the pressure on the joint surface of the expansion coupling sleeve and the shaft.

You may be right | Z19B Expansion Coupling Sleeve | Z20 type expansion coupling sleeve | Interested in other products