Z5 type expansion sleeve

时间：2013-08-01 18:07　作者：admin　点击： 次
Detailed parameters of Z5 type expansion sleeve
 

Compared with the Z5 type, the Z4 type expansion sleeve has the same taper of the cone ring, and there is a flange in the middle of the inner ring, which is easy to disassemble. The Z5 type has a longer bonding surface and a smaller taper, which is used to transmit larger loads and require higher centering accuracy. Occasions.

The basic dimensions and parameters of the Z5 expansion sleeve:

Basic size (mm) Rated load The pressure on the joint surface between the expansion sleeve and the shaft Pt (N/mm2) Screw tightening torque Ma (NM) 质量
(Kg)
d D l L L1 Axial force 
Ft Kn
Pax(Mt=0)		 Torque 
Mt kN.m
Mt(PAX=0)
100 145 60 65 77 288 14.4 192 145 4.1
110 155 60 65 77 288 15.8 175 145 4.4
120 165 60 65 77 346 20.8 192 145 4.8
130 180 68 74 86 433 28.1 193 145 6.5
140 190 68 74 86 519 36.3 214 145 7.0
150 200 68 74 86 519 39.0 200 145 7.4
160 210 68 74 86 606 48.5 219 145 7.8
170 225 75 81 95 712 60.6 215 230 10.0
180 235 75 81 95 712 64.1 203 230 10.6
190 250 88 94 108 792 75.2 178 230 14.3
200 260 88 94 108 950 95.0 203 230 15.0
210 275 98 104 120 970 102.0 187 355 17.5
220 285 98 104 120 990 109.0 183 355 19.8
240 305 98 104 120 1318 158.0 222 355 21.4
250 315 98 104 120 1340 167.5 215 355 22.0
260 325 98 104 120 1370 178.0 215 355 23.0
280 355 120 126 144 1590 22.5 188 485 35.2
300 375 120 126 144 1650 248.0 183 485 37.4
320 405 135 142 162 2140 344.0 192 690 51.3
340 425 135 142 162 2140 365.0 181 690 54.1
360 455 158 165 187 2670 480.0 176 930 74.4
380 475 158 165 187 2670 508.0 166 930 79.0
400 795 158 165 187 2670 535.0 158 930 82.8
420 515 158 165 187 3200 673.0 181 930 86.5
450 555 172 180 204 3700 832.0 175 1200 112.0
480 585 172 180 204 3950 948.0 175 1200 119.0
500 605 172 180 204 3950 988.0 168 1200 123.0
530 640 190 200 227 4320 1145.0 157 1600 151.0
560 670 190 200 227 4320 1210.0 148 1600 160.0
600 710 190 200 227 4610 1380.0 147 1600 170.0

You may be right | Z17A type expansion joint sleeve | Z16 type expansion joint sleeve | Interested in other products