Worm Gear Swiftness Reducers: Double Reduction
Ever-Power. manufacturers double lowering Worm Gear reducers that are built to last. Double reduction units are made with the same top quality parts as the single reduction Worm Gear reducers.
Double Reduction Worm Gear Quickness Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or solid shaft input
Combination of two single reduction reducers
Solid or hollow end result shafts available
Several styles of bolt-on bases available
Huge tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for prolonged and trouble-free life
All cast iron construction
9 Styles: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Lowering Worm Gear Swiftness Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock goods at no additional
cost
Double reduction gearing mechanism is employed in big machinery and automotives where in the speed should be lowered at a expected level. For eg if the type speed is usually 2000rpm and the output swiftness desired is definitely 300rpm a reduction gearing mechanism is used such as a reduction gear field. However in case of double reduction mechanism, the reduced amount of speed takes place in 2 steps. At first the source from the engine shaft includes a pinion mounted onto it through couplings. This pinion gear is then linked to an intermediate gear which is first decrease gear. This equipment is then connected to some other low quickness pinion on another shaft. This low acceleration pinion is linked to the double reduction gear reducer second reduction equipment which is attached on the propeller shaft which may be the output.
Greaves Double Reduction Velocity Reducers are two stage worm reduction devices. A exclusively designed primary worm decrease unit is integrally installed on a standard single lowering Greaves worm reducer which varieties the second stage. The composite devices provide the most compact and rigid set up for large reduced amount of speed necessary for gradual moving machinery. A wide selection of ratios upto 4900:1 is available.
The wormshafts are constructed of high quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of significant sections welded to rigid centres. Considerable versatility of shaft layout is permissible with all types of Double Reduction units
Ever-Power Double Reduction Worm Gearboxes are two stage worm reduction units.
A specially designed primary worm lowering unit is integrally mounted about a standard single lowering AGNEE worm gearbox which forms the next stage. The composite units provide the most compact and rigid arrangement for large reduction of speed necessary for slower going machinery. A wide selection of ratios up to 4900:1 is obtainable.
Double Reduction Worm Gear Box Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical selection of commonly utilized ratios from the entire range of Ever-Power Double Reduction Worm Gear Box. Details of other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Variant / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are created from high quality case hardening steel, accurately generated, ground and super finished. The worm tires comprise of phosphor bronze centrifugally cast rims of substantive sections welded to rigid centers. Considerable flexibility of shaft layout can be permissible with all types of Double Reduction models.
Product Description
The products are widely applied in the generating equipments of all types of industries household and overseas. They are the best alternatives for nowadays modern establishments of mechanical reducing travel control to know large twisting distance, large gear ratio, low sound, high productivity and low temperature.
Description:
Customized top quality double worm gear swiftness reducer aluminium gearbox reduction gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or as customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Excessive Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Stuff, Ceramics, Chemical substance, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral