DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit includes a electrical power up power down circuit with load holding on each A & B ports. A strain compensatred movement control may be added to circuit to control the decent pace of your cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned just before installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities. N46 hydraulic oil is advised.
four. The power unit must be mounted horizontally.
5. Check the oil degree in the tank soon after the initial running of the energy unit.
6. Oil modifying is required right after the first one hundred operation hrs, afterwards once each 3000 hrs.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This power unit has a energy up gravity down circuit. Start out the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve is often presented if expected. Also a stress compen sated flow manage may be additional to the circuit to control the descent speed on the cylinder.
Remark: Please consult our sales engineer for your various pump displacement, motor power or tank capacity.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned prior to installation of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of impurities.N46 hydraulic oil is recommended.
four. The electrical power unit should be mounted horizontally.
five. Check the oil degree while in the tank just after the preliminary operating in the power unit.
6. Oil modifying is required just after the first a hundred operation hrs, afterwards the moment every 3000 hours.