The EP Greenhouse gear driver is a concise and lightweight reduction gear reducer with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The geared motor can be used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP reducer is usually rainproof and windproof. The gearbox includes a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is certainly locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the geared motor can be installed in any placement. There are no restrictions, since there is no need for a bleed plug. The sealed reduction gear driver keeps the gear oil of the geared motor in optimal condition because of its entire operating life time. The reducer is suitable for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and simple to adjust. The limit switch system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).