This electrical power unit characteristics a permanent magnet motor by using a electrical power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering speed controlled through the pressure compensated flow handle valve. Products of this series might be broadly utilized in the marketplace of logistic products such as fork lift, mini lift table, and so on.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before set up of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
4. This power unit is built to be mounted vertically.
5. Check the oil degree during the tank just after the very first star from the energy unit.
6. Oil shifting is needed just after the first 100 operation hours,afterwards after every 3000 hours.
seven. More pump sizes and tank sizes are avaiable on request.