Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Acetal, nylon, and aluminum are light-weight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J possess a bracket on underneath for tying off a single end of a rope.
Style K decrease the force needed to hold your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load therefore they won’t slip in the additional direction. Pulley for3/8″ dia. rope can be established to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
metric gear rack china Acetal and light weight aluminum are lightweight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and steel. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless is certainly more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the power of a single-groove pulley to move the same load. They possess a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum is usually corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move a single load, such as for example block and tackle systems.They are able to reduce the force needed to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or products over people.
Hanging Pulleys designed for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that lets you tie off one end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also referred to as snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the force of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to maintain rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys intended for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as for example block and tackle systems. They are able to reduce the force needed to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Style A pulleys have a bracket on the bottom for tying off one end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end is not needed.
Warning: Never make use of to lift people or items over people.