rotary cutter gearbox
rotary cutter gearbox
RC-twenty Collection
Technical specs
Torque: 1,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.5, one:2.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: sixteen oz. (.47 L)
Excess weight: 34 lbs. (15.4 kg)
Purposes
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Series
RC-30 Collection
Specifications
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.47, 1:one.seventy one, 1:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Excess weight: fifty one lbs. (23.one kg)
Purposes
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Sequence
Requirements
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:1.seventy one, one:one.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Excess weight: 56 lbs. (25.4 kg)
Purposes
Rotary Cutters Rotary Slashers
Gears: Available with both straight bevel or spiral bevel gearing.
Power: Hp & Torque dependent on AGMA formula for steady duty plus a support or load class issue.
Shafting: Numerous dimensional, metallurgical, and heat-treat alternatives accessible.
Bearings: Geardrives available with numerous bearing existence choices.
Lubrication: Drives accessible with various lubes relying on working attributes
Alternative Rotary Cutter gearbox, 40hp rated, one-3/eight”-6 spline input shaft, one.57″ X twelve tapered spline output shaft and one:one.forty seven pace up ratio. These gearboxes have a square housing configuration and are similar in mounting and ratio to the spherical configuration gearboxes. These are original equipment gearboxes on the IM402, IM502 and IM602 sequence rotary cutters 
which highlighted slip clutch PTO shafts. This gearbox will not suit the IM400, IM500 and IM60 designs as they have a sleek input shaft! If your gearbox has a 12 spline output shaft and a one-3/8″ – six spline input shaft this gearbox will perform. Bolt sample is four-3/four” on middle hole to gap and 6-3/four” middle to heart of bolt hole on diagonal. The mounting holes type a sq. bolt pattern.
rotary cutter gearbox
Interested in finding out more concerning rotary cutter gearbox?