Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings feature a completely split style to help provide easy installation and disassembly. A tapered bushing with straight edges uses an internal screw to help drive the bushing in to the shaft, while a split taper has a flange and an integral on the bushing to greatly help provide more drive.
L – Space required to tighten bushing or loosen to remove hub with taper bore bushing china puller using brief hex key.
M – Space necessary to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed necessary hub diameter can be for reference just. Severe conditions may necessitate larger hub and in some instances a slightly smaller hub may be satisfactory. Inquire about specific application.
We are able to also supply particular bushings manufactured from other machinable components. Please inquire
External key on most sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in “, metric, and spline bores. Bore range between 3/8″ to 10”
Gates Taper-Lock bushings are accustomed to mount pulleys, sprockets and sheaves on shafts. The long lasting stainless construction is well suited for food and beverage applications or where noncorrosive sprockets are had a need to prevent rust.
This Taper-Lock bushing is ideal for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon metal bushing provides strength and resistance to wear and includes installation bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) can be found in a number of outside diameters to match this Taper-Lock bushing, allowing the complete selection of the amount of drive the teeth or grooves. This bushing is ideal for use in an array of mechanical and digital adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three fundamental types of ordinary bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also known as washers) to support axial loads on shafts, and linear bearings to aid and guide the movement of parts in a directly line. Flanged sleeve bearings have a flange using one end to aid axial loads. Spherical basic bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic-type material, or a combination of a metal shell and a plastic-type bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining gear, textile manufacturing equipment, and robotics, amongst others.
The maximum bore is supplied with a typical ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing installation screws can be either inch (UNC) or metric (BSW) and care should be taken to select the proper hub part number.
Taper Lock Busings are a item of Baldor Dodge and are not included with Lovejoy coupling hubs.
Optimum bores size and torque capacities are per Dodge specifications and Lovejoy isn’t responsible for the accuracy of the values listed in accordance with bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are used to install sprockets, pulleys, and couplings onto shafts. They have a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be made in bushing to allow it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is more convenient to straight bore than to drill, tap and taper bore hubs to accommodate bushings. The adapter is usually a gray iron, taper-bored sleeve whichfits in to the straight bore of a hub. The bushing basically fits in the adapter which can be tapped for the bushing screws. When tightening the locking screws, adapter is certainly expanded against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an considerable selection of energy absorbing elastomeric isolators that limit the transmitting of structure-borne vibration and impacts. Our items are created for simple use and a multitude of orientations in compression, shear and slanted position loading. While economical, these products are made from quality rubber, silicone, Neoprene and steel components that allow support for the proper quantity of load for each software. Filter through our in-depth product listing of elastomeric products including foundation mounts, cup mounts, bumpers, bushings and grommets to find the right answer for your application.
Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings feature a completely split design to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an internal screw to greatly help drive the bushing in to the shaft, while a split taper includes a flange and a key on the bushing to greatly help provide more drive.
L – Space necessary to tighten bushing or loosen to remove hub with puller using brief hex key.
M – Space necessary to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed needed hub diameter is usually for reference only. Severe conditions may necessitate bigger hub and in some cases a slightly smaller hub may be satisfactory. Inquire about specific application.
We can also supply special bushings manufactured from other machinable components. Please inquire
External key on most sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to keep concentric bores
Available in “, metric, and spline bores. Bore range from 3/8″ to 10”
Gates Taper-Lock bushings are accustomed to install pulleys, sprockets and sheaves on shafts. The durable stainless steel construction is ideal for food and beverage applications or where noncorrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to use and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) can be found in a variety of outside diameters to fit this Taper-Lock bushing, enabling the complete selection of the amount of drive the teeth or grooves. This bushing can be ideal for use in a wide variety of mechanical and electronic adjustable drives, including auto and printing industries.