Weld-On Hubs can be purchased in 3 styles to suit the user’s preference for bushing mounting types. They will be stocked for work with with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from metal.
Weld-On Hubs are commonly used with plate type sprockets and conveyor pulleys to supply for more shaft engagement.
Are manufactured to simply accept Taper Lock Bushings. Two models are available. Type S and Type W. Type S offers a shorter length through the bore, and Type W a more defined registration flange to assist with positioning and concentricity for welding.
Are manufactured to simply accept a QD design flanged bushing.

Accepts DST-Dual Split Taper design bushings.
These bushings are keyed to both the shaft and hub. The exterior key provides positive drive without torque on the cap screws. DST bushings allow for the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be utilized with weld on sprockets, pulleys as well as custom applications. All of our hubs happen to be an “X series” hub, which means they’re appropriate for any “x series” sprockets or pulleys. Sprocket X hubs can be purchased in finished bore, sq . bore, hex bore, idler and splined bore. Bore sizes range between 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are produced from 1045 CD (frosty drawn) steel and done with a dark-colored oxide coating.
Weld-On Hubs are constructed of steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are very valuable for welding into pulleys, plate sprockets, impellers,
agitators and several other devices which must be firmly fastened to the shaft.
Weld-about hubs are constructed of 1015-1025 steel, drilled, tapped and taperbored to receive the taper-lock bushing. They are of help for welding into enthusiast rotors, pulleys, plate sprockets, etc., which must be firmly installed onto shafting. Four types of hubs are available from stock.
Weld-about hubs are made from low carbon steel for good welding compatibility. They are useful for welding into admirer rotors, impellers, agitators, etc., which require secure mounting to the shaft. A standard type comes in addition to one which is specifically created for use in the end disc of a conveyor pulley.
Type S Taper-lock – at first created for use in scaled-down sprockets, now well suited for a great many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-size size for single-hub, heavy-duty applications
Type F – includes a greater flange diameter that can be welded into standard metal tubing to fabricate conveyor pulleys or perhaps process rolls
Type K – smaller sized style, especially useful for two-hub building, such as conveyor pulleys Taper-lock bushings
Both are constructed of steel materials with rugged, compact designs to support most bushings sizes.
Ever-Power is a trusted dealer of precision weld-on hubs. Weld-on hubs can be used for welding to create “B” or “C” design sprockets and for various other applications. Particular dimensional hubs are available per your technical specs on a made-to-purchase basis.
Manufactured from Steel to supply a convenient methods to secure fan rotors. Steel pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered outer diameter permits easy position. Taper bored to suit taper lock bush sizes 1210-5050.
Chain & Drives stock the complete range of Weld-On Hubs to check our coupling, pulley and sprockets stock in a nutshell reach and lengthy reach models. They might be employed in assisting the utilization of taper match bushes to melt your gear to a influenced shaft.
Taperfit or perhaps QD weld-on hubs happen to be for work with in the fabrication of conveyor pulleys, plate sprockets, lovers and impellers. Weld-on hubs are constructed with low carbon steel for good welding compatibility.

Weld-on hubs are created from 1015-1025 steel, drilled, tapped and taperbored to receive the Taperfit bushing. They are of help for welding into admirer rotors, pulleys, plate sprockets, and must be firmly attached onto shafting. Four types of hubs are available.
Weld on hubs can be purchased in many different designs such as: stock bore, end bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are made from bar steel and applied for welding to produce “B” style sprockets that include share bore, finished bore, together with styles of bushed sprockets. Exceptional hub dimensions are available per your requirements on a made-to-purchase basis.