Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque result is required. Great for student based projects which includes robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap installed into its cradle to engage the gear and worm.
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at suprisingly low voltages. We advise that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, although it is not specifically designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new specifications for reliability, effectiveness and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration at this point and a really future proof solution. The Ever-Power gear engine offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in choice positions rotated in 90º steps around the engine frame offering for unparalleled integration options.
Ever-Power gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total alternative for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outside or in wet and dusty environments without the utilization of additional enclosures. Complete rated output is available at the result shaft of the unit.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Plug connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the remedy for applications requiring a part turn, optional dual result, or an inability for the electric motor to be back driven. The DC right angle equipment motors are created for constant and intermittent duty operation. Our right angle equipment reducers are designed with many mounting plate options, making them perfect for a number of DC motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Products will work with you to create and manufacture a Worm Gear Electric motor that will optimize the overall performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm engine uses a metal gear box for durability and a higher torque output. Because of the special mechanical framework of the worm drive the engine output shaft is certainly self locking and will not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their strength in applications where high equipment ratios are necessary. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a higher overload capacity
Washdown versions enable simple and effective cleaning of the drive program.
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular design give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to meet your needs.
Worm gear models impress with their high power density and compact style. If required, we can also supply them with the impressive nsd tupH surface area treatment.
In addition to the basic EP casing, you can expect an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field set up, but we will also be glad to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Clean and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and demanding industries like meals processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides different fixing possibilities and enable a simple assembling for the customer.
Other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Motor attachment is realised generally through IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where a simple to match, high torque output is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where a simple to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The engine is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with worm motor self-lock, that is, regarding motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This can be an advantage when it is desired to eliminate any likelihood of the output driving the input.”
In other phrases, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor