1. Radial deviation: During installation, the two shafts are parallel but the center line is not on the same straight line. The deviation produced at this time is called the radial deviation. 2. Angular deviation: During installation, the centers of the two shafts are at an angle to each other, and the deviation produced at this time is called angular deviation. ...
Suitable for servo system, spindle drive, lifting platform, machine tool drive, gear box motor.It is compact, no backlash, and provides three different hardness elastomers, which can absorb vibration and compensate for radial and angular deviations. ...
The diaphragm coupling is composed of at least one diaphragm and two shaft sleeves.The diaphragm is fastened to the shaft sleeve with a pin and generally does not loosen or cause backlash between the diaphragm and the shaft sleeve.Some manufacturers provide two diaphragms, and some provide three diaphragms, one in the middle...
Couplings are common parts in machinery. The plum blossom body has six petals and eight petals. When choosing a suitable plum blossom coupling, you need to pay attention to the following points: ① Allowable rated torque-is the actual use of the coupling The allowable value of the torque at the time; ...
XL star-shaped elastic coupling features: connection without backlash under prestress, used for spindle drive, lifting platform and machine tool, etc.; the elastic element in XL star-shaped elastic coupling is engineering plastics, and it is widely used in transmission and rotation. Moment 20- 35000.NM Working temperature -35-+80 Celsius...