Slider couplings and sandwich couplings are suitable for the connection of shafts with low speed and large torque. They are two types of couplings that are widely used in building materials machinery. These two types of couplings have their own characteristics. .
The clamping shell coupling uses a pair of clamping shells split along the axial direction, which is clamped by bolts to realize the connection of the two shafts. The torque is transmitted by the friction between the inner surfaces of the two halves of the coupling. A kind of transmission component.Due to its simple structure, the clamp housing coupling...
The hardness of the 45# steel quenched and tempered parts after quenching should reach HRC56~59. The possibility of a large cross section is lower, but it cannot be lower than HRC48. Otherwise, it means that the workpiece has not been completely quenched, and there may be sorbite or even ferrite in the structure. Body organization, this kind of organization through tempering, still...
On the Mid-Autumn Festival on August XNUMX, Chinese people will look up at the full moon in the sky, eat sweet mooncakes, and spend a warm night with their families.In the hearts of Chinese people, the Mid-Autumn Festival is made up of moon, night, and home. ...
If the number of teeth of the gear is constant, the larger the modulus, the larger the radial dimension of the wheel.Modulus series standards are formulated according to the requirements of design, manufacturing and inspection.For gears with non-straight teeth,...
The elastic pin gear coupling has good compensation performance for axial, radial and angular axis deviation, good vibration reduction performance, simple structure, stable and reliable operation, no noise, no lubrication, convenient maintenance, simple assembly and disassembly, Good manufacturability, low cost, good versatility...