Tag tabHome > TAG tag > Diaphragm coupling

　　The main products of Ever-Power Coupling Factory include: slider couplings, cross slider couplings, plum couplings, star elastic couplings, diaphragm couplings, drum gear couplings, Flange coupling, pin coupling, etc...

　　Casting and forging use two different processes respectively. Forging processing and casting processing are compared. Metal can improve its structure and mechanical properties after forging processing. ...

　　Cast steel is the steel used for pouring parts, a kind of casting alloy.Cast steel is divided into cast carbon steel, cast low alloy steel and cast special steel.Cast steel refers to a type of steel casting produced by casting methods. ...

　　1. Set screw fixation: The two set screws have a 90° gap to lock the fixed shaft. In the traditional fixing method, because the front end of the screw is in contact with the shaft, it may cause damage to the shaft or difficult removal. 2. Clamping screw fixation: use hexagon socket bolt...

　　The plum coupling has good balance performance and is suitable for high-speed applications, but it cannot handle large deviations, especially axial deviations.Larger eccentricity and deflection angle will produce larger bearing load than other servo couplings. ...

　　1. Oil storage lubrication.The lubricating oil is injected from the nozzle, and a certain lubricating oil layer is maintained on the outer circle of the gear due to the centrifugal force of the lubricating oil during rotation.This lubrication method will leave impurities in the ring gear, and the oil flow has a poor heat dissipation effect, so it is only suitable for...

　　Flange coupling features: simple structure, low cost, can transmit large torque, does not allow relative displacement of the two shafts, no buffer.Purpose: Widely used in occasions with low speed, no impact, high shaft rigidity and good neutrality.Slider coupling: half coupling...

　　The installation of the bolt in the wrong direction causes the diaphragm to be twisted and deformed. The bolt is one of the important parts of the diaphragm coupling. The correct installation of the bolt directly affects the life and safety of the diaphragm coupling. ...

　　1) Visual inspection to confirm whether the coupling has signs of wear or fatigue, and then clean the coupling; 2) If the coupling needs lubrication, check and replace the lubricating oil, most couplings only need to be replaced once a year Lubricating oil, but if used in harsh ring...

　　Ways to improve the life of drum gear couplings: The tooth width coefficient affects the tooth root bending strength and tooth surface contact strength of the tooth. The larger the tooth width coefficient, the greater the strength of these two items. The tooth width coefficient affects the degree of coincidence. When the tooth width coefficient is less than a certain value range, its value...