The basic dimensions and parameters of the Z10 expansion sleeve:
A Basic size (mm) Dimensions | Hexagon socket screw | Rated load | The screw tightening torque MA N. m |
weight kg |
e mm |
|||||
d | D | dn | l | H | d1 |
Axial force Ft kN |
Torque Mt kN ·m |
|||
12 | 32 | 10 | 9 | 11 | M5 × 8 | 8 | 0.038 | 5 | 0.06 | 1 |
14 | 37 | 12 | 9 | 0.052 | 0.08 | |||||
16 | 41 | 14 | 12 | 15 | M5 × 12 | 13 | 0.090 | 0.12 | 1.5 | |
18 | 44 | 15 | 10 | 0.080 | ||||||
16 | 14 | 0.112 | ||||||||
20 | 47 | 17 | 16 | 0.140 | 0.15 | |||||
18 | 20 | 0.184 | ||||||||
24 | 50 | 19 | 14 | 18 | 17 | 0.160 | 0.2 | 2 | ||
20 | 20 | 0.200 | ||||||||
22 | 25 | 0.280 | ||||||||
30 | 60 | 24 | 16 | 20 | 23 | 0.28 | 0.3 | |||
25 | 25 | 0.32 | ||||||||
26 | 27 | 0.36 | ||||||||
36 | 72 | 28 | 18 | 22 | M6 × 16 | 37 | 0.55 | 12 | 0.4 | |
30 | 43 | 0.68 | ||||||||
31 | 46 | 0.74 | ||||||||
44 | 80 | 34 | 20 | 24 | 41 | 0.70 | 0.6 | |||
35 | 44 | 0.77 | ||||||||
36 | 47 | 0.85 | ||||||||
50 | 90 | 38 | 22 | 26 | 55 | 1.10 | 0.8 | 2.5 | ||
40 | 64 | 1.32 | ||||||||
42 | 72 | 1.54 | ||||||||
55 | 100 | 42 | 23 | 29 | 54 | 1.13 | 1.1 | 3 | ||
45 | 66 | 1.50 | ||||||||
48 | 77 | 1.85 | ||||||||
62 | 110 | 48 | 69 | 1.60 | 1.3 | |||||
50 | 77 | 1.92 | ||||||||
52 | 84 | 2.17 | ||||||||
68 | 115 | 50 | 73 | 1.80 | 1.4 | |||||
55 | 90 | 2.44 | ||||||||
60 | 103 | 3.10 | ||||||||
75 | 138 | 55 | 25 | 31 | M8 × 25 | 97 | 2.70 | 29 | 1.7 | 4 |
60 | 117 | 3.52 | ||||||||
65 | 133 | 4.30 | ||||||||
80 | 145 | 60 | 108 | 3.25 | 1.9 | |||||
65 | 121 | 3.97 | ||||||||
70 | 133 | 4.70 | ||||||||
90 (85, 90) |
155 | 65 | 30 | 38 | 145 | 4.70 | 3.3 | |||
70 | 170 | 5.98 | ||||||||
75 | 190 | 7.20 | ||||||||
100 (95, 100) |
170 | 70 | 34 | 43 | 170 | 5.91 | 4.7 | |||
75 | 200 | 7.42 | ||||||||
80 | 220 | 8.90 | ||||||||
110 (105, 100) |
185 | 80 | 39 | 40 | M10 × 30 | 226 | 9.05 | 58 | 5.9 | 5 |
85 | 255 | 10.38 | ||||||||
90 | 280 | 12.60 | ||||||||
125 (120, 125, 130) |
215 | 90 | 42 | 53 | 280 | 12.85 | 8.3 | 5.5 | ||
95 | 315 | 14.98 | ||||||||
100 | 340 | 17.00 | ||||||||
140 (135, 140) |
230 | 100 | 46 | 58 | M12 × 35 | 370 | 18.50 | 100 | 10 | 6 |
105 | 400 | 21.10 | ||||||||
110 | 431 | 23.70 | ||||||||
155 (155, 160) |
263 | 110 | 50 | 62 | 440 | 24.0 | 15 | |||
115 | 473 | 27.0 | ||||||||
120 | 508 | 30.2 | ||||||||
165 (165, 170) |
290 | 120 | 56 | 68 | M16 × 40 | 525 | 34.5 | 240 | 22 | 7 |
125 | 620 | 38.6 | ||||||||
130 | 660 | 42.8 | ||||||||
175 (175, 180) |
300 | 130 | 650 | 42.0 | 8 | |||||
135 | 680 | 46.2 | ||||||||
140 | 720 | 50.6 |
The Z10 type expansion sleeve is suitable for the keyless coupling device between the shaft and the sleeve. It can apply clamping force to the sleeve from the outside, so that a mechanical compression fit is formed between the shaft and the sleeve, and the torque is transmitted, and the expansion sleeve itself does not transmit Any moment and load, easy to install and disassemble.