Rigid couplings have two main structural forms: ① Relying on reamed holes and bolts to achieve two-axis alignment and relying on bolt rods to bear extrusion and shear to transmit torque; ...
Couplings and clutches are mainly used to connect two shafts so that they can rotate together and transmit torque.The two shafts connected by the coupling can only be separated by disassembly after the machine is stopped.The two shafts connected by the clutch can generally make it at any time during the operation of the machine...
The search of the coupling is one of the important tasks of the machine installation. The purpose of the alignment is to make the center lines of the driving shaft and the driven shaft in the same straight line when the machine is working. The accuracy of the alignment is related to whether the machine is It can operate normally, especially for high-speed machines...
The metal diaphragm coupling is simple in structure, easy to assemble and disassemble, there is no gap in the connection of the elastic elements, generally does not need lubrication, convenient maintenance, easy to balance, light weight, no noise, strong adaptability to the environment, high reliability, and large load-bearing , High efficiency, long service life...
Some customers may ask why the rubber rod is so worn out?This phenomenon may be caused by the misalignment between the motor coupling and the reducer, that is, the axis does not coincide.The central axis of the motor rotor and the central axis of the reducer input shaft, if they coincide...
There are two methods for measuring and adjusting the water pump coupling during the overhaul process as follows: 1) Use a dial indicator and a meter frame or a special alignment tool to measure the misalignment and non-parallelism of the two couplings. This method is suitable for Large pump, high speed, rigid coupling...