Coupling is a mechanical part that is used to connect two shafts (active shaft and driven shaft) in different machines to rotate together to transmit torque. It has a certain ability to compensate for the offset of the two shafts, in order to reduce the mechanical transmission system Vibration, reduce shock peak load,...
What is the nominal torque of the coupling?That is, the force on the shaft, multiplied by the radius of the shaft, is called torque.The nominal torque of the coupling is the limit value to ensure that the coupling does not cause fatigue damage when the shaft is twisted. ...
The tooth clutch is characterized by its simple structure and compactness.In order to improve the bending strength and joint strength of the teeth, the external teeth can be made into short teeth.The toothed clutch should be engaged at a standstill or at a low speed difference. ...
In metallurgical machinery and heavy machinery low-speed and heavy-load shafting transmission, shock, vibration and two-axis deviation are the unfavorable factors of proportional convexity. Only the drum gear coupling with good vibration reduction and cushioning effect can improve the operation of the transmission system. Status, and the gear coupling doesn't care...
The coupling is used to connect the two shafts together. The two shafts cannot be separated when the machine is running. The two shafts can be separated only after the machine is stopped and the connection is disconnected. ...
The coupling is generally composed of two half-couplings, which are used as a set. One half-coupling is connected to the output end and the other half-coupling is connected to the input end. ...