KL type slider coupling is a kind of slider coupling. The structure is similar to the cross slider coupling. The difference is that the middle block is a nylon block. The middle block is used on both sides of the half coupling end surface Sliding in the corresponding radial groove to realize the coupling of the two halves of the coupling. ...
1. It can be assembled and disassembled without interfering with the master-slave device. The replacement of the coupling can be completed within 2 hours, which improves equipment utilization. 2. It can operate under harsh environmental conditions, can operate within 300 degrees Celsius, can operate in corrosive environments such as acid, alkali, salt spray...
Diaphragm is divided into: continuous polygonal ring shape, circular ring shape, separated connecting rod shape, spoke shape, formed diaphragm, and waved diaphragm.The characteristics of continuous polygonal ring and circular ring: each coupling is composed of several diaphragms of equal thickness.
Drum-shaped gear coupling is a key equipment for energy saving.Sometimes there are some failures, as follows: 1. Insufficient lubrication or dry grinding; 2. The oil is not clean; 3. The center deviation of the drum gear coupling is too large, and the relative displacement of the tooth surface is large;...
Drum gear couplings are suitable for low-speed and heavy-duty working conditions, such as metallurgy, mining, lifting and transportation industries, and also suitable for shaft transmission of various machinery such as petroleum, chemical, general machinery and so on. ...
In the coupling, under the condition of angular displacement, the edge of the straight tooth is squeezed, and the stress is concentrated. The drum-shaped tooth surface improves the contact conditions of the inner and outer teeth, thereby reducing the friction and wear of the tooth surface and reducing the noise.Under the same conditions, the outer diameter of the inner gear sleeve and the coupling...