Couplings, also known as couplings, are mainly used to connect the transmission shafts of various mechanisms. Due to different mechanical equipment, the functions of various couplings are also slightly different. For example, on a forklift, the coupling is used to transmit the transmission and drive. The power between the bridges...
The elastic coupling can transmit torque and rotation angle, while absorbing the safety deviation of the shaft. When the installation deviation exceeds the allowable value, it may cause vibration or shorten the life of the coupling. Therefore, ensure that the deviation is adjusted properly...
The type of power machine is the basic factor for selecting the type of coupling; the power of the power machine is one of the main basis for determining the size of the coupling, and it is proportional to the torque of the coupling...
There are three cold mounting methods for coupling installation methods: press-in assembly method, direct assembly method and hydraulic assembly method. This is an ideal assembly method, but it must be designed and manufactured in advance to respond to the other components before it can be used. ...
The structural feature of the safety coupling is that there is a safety link (such as a movable pin connection, etc.), which can only withstand a limited load. When the actual load exceeds the previously limited load, the safety link changes, cutting off the movement and Transmission of power...
When the gear coupling is working, the two shafts produce relative angular displacement. The tooth surfaces of the internal and external teeth periodically slide relative to each other in the axial direction, which will inevitably cause tooth surface wear and power consumption. Therefore, the gear coupling needs to have a good and Working in a sealed state....