1. The purpose of finding the center of the coupling: Make the centerline of one rotor shaft a continuation curve of the other rotor shaft centerline. 2. Conditions for finding the center of the coupling: 1) Make the centers of the two pairs of wheels coincide, that is, make the outer surfaces of the two pairs of wheels concentric. 2) Make two pairs of wheels...
The shape and structure of the cross slider coupling and the slider coupling are similar, and they are suitable for different working occasions.Let me give you a brief introduction: The cross slider coupling is composed of two half couplings with grooves on the end faces and a middle plate with convex teeth on both sides...
The flange coupling is a rigid coupling, which requires high neutrality of the two shafts. When the relative displacement of the two shafts exists, it will cause additional loads in the machine parts and worsen the working conditions. The main disadvantage.Advantages: But due to the simple structure and low cost,...
Couplings are divided into standard parts and non-standard parts.Commonly produced by manufacturers are standard parts, mass production, various uses and models have national standards.Generally, standard parts are used as much as possible, because they are easy to purchase, cheap, and available from stock. ...
What is right?It means that two or more devices are arranged so that the rotation axis of the device after installation is connected by a coupling and the axis is on the same straight line in the running state.Good alignment means that the bearings, shafts and couplings are all in good...