Tag tabHome > TAG tag > Rigid coupling

　　Rigid coupling sleeves are divided into: flange coupling (basic type, with centering ring, with protective edge, with centering tenon type), radial key type flange coupling (basic type, movable type), Sleeve coupling, shell coupling (bolt clamping, clamp clamping), flat...

　　The characteristics of the diaphragm coupling are similar to the bellows coupling. In fact, the way the coupling transmits torque is similar. The diaphragm itself is very thin, so it is easy to bend when the relative displacement load is generated, so it can withstand up to The deviation of 1.5 degrees, while in the servo...

　　Star couplings are sometimes mistaken for plum blossom couplings. Their appearance is almost similar after installation. However, under the same model, the star coupling bears greater torque. Compared with the plum blossom coupling, its inner hole and The shape can be made smaller. ...

　　In the GB/T 3852 standard, the shaft hole forms include Y-shaped long cylindrical shaft hole (limited to the end of the oblong shaft extension motor), J-shaped short cylindrical shaft hole with counterbore (recommended), and J1 type without Counterbore short cylindrical shaft hole (recommended), Z-shaped long conical shaft with counterbore...

　　The company has complete mechanical processing equipment, strives for product excellence, and is meticulous, in order to provide customers with perfect product quality, and constantly play to its own advantages, so that the company develops steadily.Strictly control the quality of the whole process, and the appearance of each set of products...

　　The ML series plum-shaped elastic coupling is mainly composed of two protruding teeth that are closely meshed and subjected to radial compression to transmit torque. When the two axes are relatively offset, the elastic element undergoes corresponding elastic deformation, which plays a role of automatic compensation. ...

　　Annealing is a heat treatment process in which steel parts are heated to a certain temperature, and then slowly cooled after heat preservation.Annealing is often used as a preliminary heat treatment, which is carried out in the part manufacturing process to prepare for the next processing procedure. ...

　　General machinery is composed of prime mover, transmission and working mechanism. These three parts must be connected to work, and the coupling is an important device that connects them.Coupling is mainly used for the connection between two shafts, it can also be used for shafts and other...

　　There are many kinds of couplings, which belong to the category of general mechanical parts. They are used to connect two vehicles (the driving shaft and the driven shaft) in different mechanisms to rotate together to transmit torque. It is a mechanical part that transmits torque at high speed and heavy load. In the transmission, some couplings have buffer...

　　Rigid fixed sleeve coupling: simple structure, easy to manufacture, small radial size, low cost, but it needs to move a large distance in the axial direction during assembly and disassembly, and can only be used to connect two cylindrical shafts with the same diameter Shaft extension, suitable for stable work, often forward and reverse...