Tag tabHome > TAG tag > Slider coupling

　　First of all, the first point is to determine the form of the coupling according to the application (what driven equipment, what is it used for, and what are the requirements for the whole set of equipment?) according to the equipment. ...

　　When using a torque sensor, you must pay attention to the installation problem. Because the torque sensor is a power device, especially the use of a dynamic torque sensor connected to the motor, the measurement of large torque force needs to be used with caution, load equipment, couplings, and couplings ...

　　The diaphragm coupling relies on the elastic deformation of the diaphragm to compensate for the relative displacement of the connected two shafts. It is a high-performance flexible coupling with metal elastic elements. It does not require lubrication, has no rotation gap, and is not affected by temperature and oil pollution. The structure is relatively compact, the strength is high, and the service life is long...

　　General machinery is composed of prime mover, transmission machine and working machinery. These three parts must be connected to work. The coupling is an important device that connects them. The coupling is mainly used for the connection between the two shafts. , It can also be used for shafts and other...

　　Due to manufacturing and installation errors, deformation after load, and the influence of temperature changes on the two shafts connected by the coupling, the relative position of the two shafts will change, and strict alignment is often not guaranteed.According to whether the coupling has elastic elements, various relative displacements...

　　Oldham coupling is a mechanical component that is used to connect two shafts in different mechanisms and make them rotate together to transmit torque.The slider has a circular ring shape, which is a rigid connecting piece, which is mainly used in some large mechanical equipment...

　　The quincunx elastic coupling has simple structure, small radial size, light weight, and small moment of inertia. It is suitable for medium and high speed applications. The quincunx elastic coupling works stably and reliably, and has good vibration damping, buffering and electrical insulation properties. ...

　　Brake is a device used to decelerate or stop a mechanism or machine. Sometimes it is also used to adjust and limit the speed of movement of a mechanism or machine. It is an important part to ensure the safe and normal operation of a mechanism or machine. ...

　　The elastic sleeve pin coupling uses a pin with an elastic sleeve (rubber material) on one end, which is installed in the flange hole of the two halves of the coupling to realize the connection of the two halves of the coupling.The origin of the elastic sleeve pin coupling: as early as the late 20s, it was formulated as a mechanical...

　　Torx coupling is a mechanical component that is mainly used to connect two rotating shafts in mechanical transmission to transmit torque or rotation angle. It can also be used for equipment protection of safety devices. ...