Tag tabHome > TAG tag > Coupling

　　Slider couplings are often used in common motors. In some occasions, they can also be used to connect servo motors. During use, the positive relative displacement is corrected by the sliding of the center slider, because the resistance to the relative displacement is between the slider and the bushing. Friction between, so it...

　　There are many kinds of couplings, which belong to the category of general mechanical parts. They are used to connect two vehicles (the driving shaft and the driven shaft) in different mechanisms to rotate together to transmit torque. It is a mechanical part that transmits torque at high speed and heavy load. In the transmission, some couplings have buffer...

　　The brake is a component that controls the operation and stopping of mechanical equipment. When the transmission system is required, the brake should be in an open state; when the mechanical equipment stops running, the brake should immediately stop the brake wheel.Therefore, the brake must be sensitive,...

　　The main role of mechanical coupling in transmission is to transmit torque, so torque is mostly used as the main parameter of the coupling at home and abroad.The standard stipulates that the torque series range is 0.1~200000N•m, and the torque is less than 0.1N•m. ...

　　Because of the elastic element, the elastic coupling can not only compensate the deviation between the two shafts, but also has the function of buffering and damping vibration, so it is suitable for frequent start-up, frequent forward and reverse rotation, variable load and high-speed operation. ...

　　The purpose of adding a gasket in the middle of the coupling is: When the equipment starts and stops, it is easy to cause problems such as increased rotor movement and equipment overload. For such problems, add a gasket in the middle of the coupling. The gasket should be selected with good elasticity. , The function of the spring washer is to prevent loosening.bolt...

　　The radial movement of the star-shaped elastic coupling due to the centrifugal force during high-speed operation will accelerate its wear, and a shell is added.In addition to preventing dust and oil storage, insufficient thinning may cause interference. Excessive thinning will weaken the strength of the tooth, and the backlash will be very...

　　Coupling finding is one of the important tasks of machine installation. The purpose of alignment is to make the center lines of the driving shaft and the driven shaft on the same straight line when the machine is working. The accuracy of alignment is related to whether the machine can Normal operation is especially important for high-speed machines...

　　Couplings and clutches are mainly used to connect two shafts so that they can rotate together and transmit torque.The two shafts connected by the coupling can only be separated by disassembly after the machine is stopped.The two shafts connected by the clutch can generally make it at any time during the operation of the machine...

　　The search of the coupling is one of the important tasks of the machine installation. The purpose of the alignment is to make the center lines of the driving shaft and the driven shaft in the same straight line when the machine is working. The accuracy of the alignment is related to whether the machine is It can operate normally, especially for high-speed machines...