时间：2013-12-19 19:26　作者：admin　点击： 次

The start, stop or forward and reverse rotation of the motor may impose a larger load on the coupling than the "maximum torque of the motor". Therefore, when designing and manufacturing the coupling, ensure that the maximum load torque applied to the coupling is ensured. Below "rated torque".When a torque exceeding the allowable value is applied, the coupling may be deformed, which may shorten the life of the coupling or damage it.If you need to perform forward and reverse frequently, please select "Rated torque" which should be 3 times of the rated torque of the motor.
Peak torque (Nm): The safety rate must be designed within the rated value.
Static torsional stiffness (Nm/rad) refers to the torsional stiffness of the coupling.
Moment of inertia (Kg.m2) refers to: the moment of inertia of the coupling.
Maximum speed (r/min): When selecting the coupling, ensure that the maximum speed of operation is below the "maximum speed".
Radial deviation (mm) refers to the allowable value of the parallel deviation of two connected shafts.