时间：2015-03-03 18:10　作者：admin　点击： 次

1. Before installation, clean the end faces of the two shafts and check the fit of the key grooves on the end faces;
2. After the diaphragm coupling is installed, all screws must be checked for normal operation in one shift. If they are found to be loose, they must be tightened. Repeat this for several shifts to ensure that they will not become loose;
3. The diaphragm coupling should avoid long-term overload use and operation accidents;
4. When the diaphragm coupling is in operation, check whether the diaphragm coupling is abnormal. If any abnormality occurs, it must be repaired;
5. Diaphragm couplings must take appropriate safety precautions at various locations where personal and equipment accidents may be caused by the operating diaphragm couplings;
6. In order to prevent the fretting wear of the diaphragm during high-speed operation, causing microcracks and damage to the bolt holes of the diaphragm, solid lubricants such as molybdenum disulfide can be applied between the diaphragms or the surface of the diaphragm can be coated with anti-friction层处理。 Layer processing.