The maximum torque transmitted by the coupling should be less than the allowable torque value. The determination of the maximum torque should consider the acceleration/deceleration torque and overload torque required for machine braking. However, when the design data is insufficient or the analysis is difficult, the maximum torque can be determined by Calculating torque selection...
The gear coupling is a removable rigid coupling consisting of an outer sleeve with internal teeth and flanges and an inner sleeve with external teeth.The hub of the inner sleeve is respectively connected with the driving shaft and the driven shaft; the two outer sleeves are fixed together by bolts outside the flange. ...
The main structure of the serpentine spring coupling is composed of two half couplings, two half outer covers, two sealing rings and a serpentine spring sheet.It transfers torque by embedding the serpentine spring into the tooth slots of the two halves of the coupling. For example, the coupling uses serpentine springs to embed the two half of the coupling...
Membrane stress caused by the torque of the diaphragm coupling.Suppose the transmitted torque is T (Nm), and the total number of pieces is m. For 8-hole bolts, the simplified conditions know: the torque of a single diaphragm is T1=T/m, and the force on each main bolt is F =T/4mR. ...
1. Elastic coupling clamping screw fixation: Utilize the tightening force of the hexagon socket bolt to shrink the slit and clamp the shaft tightly.This method is convenient to fix and disassemble, and will not cause damage to the shaft, so it is a very common fixing method. ...
The SL slider coupling is composed of two shaft sleeves and a center slider. The center slider as a torque transmission element is usually made of engineering plastics. In special cases, other materials, such as metal materials, can be selected. ...