The elastic pin gear coupling has the performance of compensating the relative deviation of the two shafts to a certain extent. It is suitable for medium and high power transmission, and is not suitable for working parts that have certain requirements for vibration reduction and strict control of noise. ...
Ordinary bolts can be disassembled and re-used, and can bear lateral and axial loads, but the lateral load bearing method is mainly based on the friction caused by the pre-tightening torque. ...
The installation of the bolt in the wrong direction causes the diaphragm to be twisted and deformed. The bolt is one of the important parts of the diaphragm coupling. The correct installation of the bolt directly affects the life and safety of the diaphragm coupling. ...
Ways to improve the life of drum gear couplings: The tooth width coefficient affects the tooth root bending strength and tooth surface contact strength of the tooth. The larger the tooth width coefficient, the greater the strength of these two items. The tooth width coefficient affects the degree of coincidence. When the tooth width coefficient is less than a certain value range, its value...
The principle of JQ type-clamped shaft coupling: It uses two clamped shells that are split along the axial direction. The clamped shaft coupling has multiple leaf branches. Like a slider coupling, it has buffering due to its elasticity. The effect of vibration reduction, so it is used more in situations with strong vibration...
In practical applications, the intermediate shaft type is generally used, which is also called a double diaphragm coupling to improve the performance of two-axis offset compensation.The bolt is one of the important parts of the double diaphragm coupling. Its correct installation directly affects the performance life and safety of the diaphragm coupling...