1. It has obvious shock absorption, no noise and no wear. 2. Adapt to high temperature (-80+300) and work in harsh environments, and can move safely under shock and vibration conditions. 3. High transmission efficiency, up to 99.86%.Especially suitable for medium, high speed and high power transmission...
There are hundreds of types of gear couplings, but there are two basic forms: 1. Combination of internal and external teeth; 2. Combination of end gears.Other forms are deformations on these two foundations. ...
1) The maximum operating compensation amount refers to the two-axis phase offset formed by comprehensive factors such as manufacturing errors, installation errors, and changes in working load caused by vibration, shock, and temperature changes in the working state. ...
、Before installation, clean the end faces of the two shafts and check the fit of the key notches on the end faces; 2. After the diaphragm coupling is installed, it is necessary to check all screws for normal operation. If found to be loose, they must be tightened. Repeat this for several shifts. To ensure that it will not loosen...
The structure of the tire coupling, the middle is a rubber tire ring, which is connected with the half coupling with a backing plate. Its structure is simple and reliable, and easy to deform. Therefore, it allows a relatively large relative displacement and an angular displacement. Up to 5°~12°, axial displacement up to 0.02D, radial position...
The elastic sleeve pin coupling is characterized by simple structure, convenient installation, easy replacement, small size and light weight.Since the deformation of the elastic sleeve is not large when it is squeezed when working, and the matching gap between the elastic sleeve and the pin hole should not be too large, the elastic pin coupling...