Coupling is a mechanical part that is used to connect two shafts (active shaft and driven shaft) in different machines to rotate together to transmit torque. It has a certain ability to compensate for the offset of the two shafts, in order to reduce the mechanical transmission system Vibration, reduce shock peak load,...
In metallurgical machinery and heavy machinery low-speed and heavy-load shafting transmission, shock, vibration and two-axis deviation are the unfavorable factors of proportional convexity. Only the drum gear coupling with good vibration reduction and cushioning effect can improve the operation of the transmission system. Status, and the gear coupling doesn't care...
The coupling is used to connect the two shafts together. The two shafts cannot be separated when the machine is running. The two shafts can be separated only after the machine is stopped and the connection is disconnected. ...
Diaphragm is divided into: continuous polygonal ring shape, circular ring shape, separated connecting rod shape, spoke shape, formed diaphragm, and waved diaphragm.The characteristics of continuous polygonal ring and circular ring: each coupling is composed of several diaphragms of equal thickness.
Correctly install the diaphragm coupling bolt method: Insert the bolt from the outside of the small hole of the flange, and then penetrate into the diaphragm hole (pay attention to the direction of the diaphragm, the diaphragm is composed of many single sheets, rivets and rivet washers, rivets The gasket should be in contact with the buffer sleeve, otherwise it will affect...
The mechanical transmission mechanism can change the mode, direction or speed of the movement provided by the power, and it can be used purposefully by people.There are many types of transmission mechanisms in ancient China, and they are widely used. In addition to the above, such as seismographs, blowers, etc...