Tag tabHome > TAG tag > Elastic pin coupling

　　Please pay attention to the following points when installing the diaphragm coupling: 1. Products with diaphragm have edges and may cause injury. It is recommended to wear thick gloves during installation; 2. Please install a protective cover around the coupling Wait for the device to ensure safety; 3. The axis deviation during installation exceeds...

　　The coaxiality of the coupling is the extension of the axis of the connected equipment in a straight line called coaxial.Coaxiality of mechanical and electrical equipment couplings is an important item for the quality requirements of mechanical and electrical equipment installation and maintenance.The coaxiality directly affects the operation of the connected equipment...

　　Rigid couplings are divided into flange couplings, radial key flange couplings, sleeve couplings, clamp couplings and parallel shaft couplings.The material of the flange coupling can be gray cast iron and carbon steel, and cast steel or forged steel should be used for heavy load or when the peripheral speed is greater than 30 m/s. ...

　　To ensure that the clutch is always in a good working condition and has a satisfactory service life during the working process, in addition to the correct selection of the capacity and structure of the clutch, the correct installation, use and maintenance of the clutch are also required. ...

　　The movable connection formed between the component parts of the movable rigid coupling has a degree of mobility in a certain direction or several directions, so it can compensate the relative displacement of the two shafts.Commonly used removable rigid couplings are as follows: (1) Gear coupling...

　　1. It has a high power-to-mass ratio, which is especially suitable for connecting high-power power devices; 2. The non-linear change in stiffness between shafts effectively restricts the drift of the magnetic center of the motor; 3. No lubrication or maintenance can fundamentally eliminate gear coupling Vibration caused by tooth surface wear...

　　Speaking of plum blossom couplings, the current demand is relatively large.Before we choose, we must first understand some of the performance and characteristics of the coupling.First of all, for the material, general manufacturers use No. 45 steel, while the elastomers choose industrial plastics, polyurethane bombs...

　　Diaphragm forms are divided into: continuous polygonal ring shape, circular ring shape, separated connecting rod shape, spoke shape, formed diaphragm, and waved diaphragm.The characteristics of continuous polygonal ring and circular ring: Each coupling is composed of a number of diaphragms of equal thickness, and the outer edge of each piece is arc-shaped elastic...

　　In order to prolong the life of the coupling, the following points should be done: 1. Before installation, the end faces of the two shafts should be cleaned, and the coordination of the key grooves on the end faces should be checked. 2. After installation, all screws must be checked after normal operation for one shift. If they are found to be loose, they must be tightened. This...

　　Coupling is the intermediate connecting part of each movement mechanism, it has a direct impact on the normal operation of each movement machinery, so pay attention to the following 8 points when using: 1. The bolts of the coupling must not be loose or damaged. 2. The coupling is not allowed to have cracks, if there are cracks...