时间：2014-02-23 19:39　作者：admin　点击： 次

During installationDiaphragm couplingPlease pay attention to the following points:
1. Products with diaphragms have edges and may cause injuries. It is recommended to wear thick gloves during installation;
2. Please install protective covers and other devices around the coupling to ensure safety;
3. When the shaft center deviation exceeds the allowable value during installation, the coupling may be deformed, resulting in damage or shortened service life;
4. The allowable axis deviation of the coupling includes radial, angular, and axial deviation. When installing, please make adjustments to ensure that the axis deviation is within the allowable range of the corresponding product catalog.
5. When multiple deviations appear at the same time, the corresponding allowable value should be halved;
6. In order to extend the service life of the coupling, it is recommended to set the axis deviation within 1/3 of the allowable value;
7. Tighten the screws after inserting the mounting shaft, otherwise it will cause the coupling to deform. When tightening the screws, please use a torque wrench, do not use screws other than accessories for installation;
8. If there is an abnormal sound during operation, please stop the operation immediately and check the installation accuracy and screw loosening. It is recommended to apply adhesive on the outer surface of the screw after installation and debugging to increase the protection performance.