In order to extend
CouplingThe life span is to be as follows:
1. Before installation, clean the end faces of the two shafts and check the fit of the key grooves on the end faces.
2. After installation, all screws must be checked after normal operation for one shift. If they are found to be loose, they must be tightened. Repeat this for several shifts to ensure that they will not loosen.
3. The coupling should avoid long-term overload use and operation accidents.
4. When the coupling is in operation, it is necessary to check whether the coupling is abnormal. If any abnormality occurs, it must be repaired in time.