The coupling is axially embedded in the two halves by a serpentine spring leaf for more than 36%.The serpentine spring sheet with trapezoidal section is made of high-quality spring steel, subjected to strict heat treatment, and specially processed. It has good mechanical properties, so that the service life of the coupling is much longer than that of non-metallic elastic...
This type of coupling is equipped with elastic elements, which can not only compensate the relative displacement between the two shafts, but also have the ability to buffer and reduce vibration.The more energy the elastic element can store, the stronger the cushioning capacity of the coupling; the elastic hysteresis and elastic change of the elastic element...
(1) Fix the outer foot on the side of the motor of the lifting accessories coupling, and move the inner foot until the eccentric line between the motor and the pump center is zero.To ensure that the motor does not move arbitrarily, after fixing the feet of one side of the motor, the other side should be supported by the top wire. ...
Rigid coupling, as the name implies, is actually a torsionally rigid coupling. Even when it is under load, there is no backlash. Even when the load is caused by deviation, the rigid coupling still transmits torque rigidly. ...
Key points for coupling selection: ①Allowable rated torque-is the allowable value of the torque that the coupling bears in actual use; ②Allowable maximum torque-is the maximum critical value for damage to the coupling during use; ③Allowable maximum speed-need to be selected Make sure that the speed of the motor is...
When using a torque sensor, you must pay attention to the installation problem. Because the torque sensor is a power device, especially the use of a dynamic torque sensor connected to the motor, the measurement of large torque force needs to be used with caution, load equipment, couplings, and couplings ...