1. Oil storage lubrication.The lubricating oil is injected from the nozzle, and a certain lubricating oil layer is maintained on the outer circle of the gear due to the centrifugal force of the lubricating oil during rotation.This lubrication method will leave impurities in the ring gear, and the oil flow has a poor heat dissipation effect, so it is only suitable for...
1. Reasonable selection: determine the transmission torque reasonably. Generally, the transmission torque should be determined according to the actual transmission power and actual working speed of the unit. The diaphragm coupling is selected, so that the selected diaphragm coupling can not only meet the torque transmission Requirements, and the lightest structure,...
Diaphragm couplings are two half-shaft joints respectively installed on the two shafts, with an extended section in the middle. A set of diaphragms are connected together in the correct way with precision bolts, and there must be a certain gap between the two diaphragms. . ...
The structure of the WH type slider coupling is similar to the SL cross slider coupling. The difference is that the middle cross slider is square. The cross slider coupling consists of two semi-couplings with grooves on the end faces. And a middle plate with convex teeth on both sides. ...
The assembly of the diaphragm coupling on the shaft is one of the keys to the installation of the coupling.The fit between the diaphragm coupling and the shaft is mostly interference fit. The connection is divided into keyed and non-keyed connections. The shaft hole of the elastic diaphragm coupling is divided into two types: cylindrical shaft hole and tapered shaft hole. ...
99.86. It has obvious shock absorption, no noise and no wear.XNUMX. The transmission efficiency is high, up to XNUMX%.Especially suitable for medium, high speed and high power transmission.XNUMX. It can accurately transmit the speed without slip, and can be used for the transmission of precision machinery. ...