时间：2014-10-21 18:02　作者：admin　点击： 次

The elastic coupling can transmit torque and rotation angle, while absorbing the safety deviation of the shaft. When the installation deviation exceeds the allowable value, it may cause vibration or shorten the life of the coupling. Therefore, ensure that the deviation is adjusted properly.
There are three kinds of shaft deviations, namely radial deviation, angular deviation and axial deviation.Please adjust the deviation so that it is lower than the allowable value listed in the specification table of each product.
The maximum deviation tolerance listed in each product refers to the case where only one deviation exists. When two or more deviations exist at the same time, the allowable value should be less than 1/2 of the maximum deviation in each specification table.
Deviations do not only occur in equipment assembly. Vibration, thermal expansion, and bearing wear during work can cause deviations.Therefore, it is recommended to adjust the axial deviation to less than 1/3 of the maximum value.